Uniden TCX 800 User Manual

– 4 –
Step 2: Connect the Charger
1
Connect the AC adapter
to the DC IN 9V jack
and to a standard 120V
AC wall outlet.
2
Set the charger on a
desk or tabletop, and
place the handset in the
charger with the keypad
facing forward.
3
Make sure the charge LED
illuminates. If the LED does not illuminate, check to see that the AC
adapter is plugged in and that the handset makes good contact with
the charger charging contacts.
•Use only the supplied AD-0005 AC adapter. Do not use
any other AC adapter.
•Place the charger close to the AC outlet so that you can
unplug the AC adapter easily.
4 Charge the handset for 15-20 hours before using.
Step 3: Register the Handset
YOU NEED TO REGISTER THE TCX800 TO THE MAIN BASE BEFORE USE!
1
Be sure the handset battery is
fully charged.
2
With the main base in standby
mode (i.e., not being used),
place the extra handset in the
main base unit to begin
registration.
3
While the handset is
registering,
Handset
Registering
will appear in
the LCD. When
Registration
Complete
is displayed, the
handset has been registered to
the base.
If
Registration Failed
appears, please try these steps
again.
TCX800
Handset
TCX800
Handset
Charger
Main Base
TCX800 Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the TCX800
handset in the main
base to register.
1
2
3
UU852BH(TCX800) OM.fm Page 4 Wednesday, January 7, 2004 6:56 PM

Uniden TCX 800 Specifications

General

Brand	Uniden
Model	TCX 800
Category	Cordless Telephone
Language	English