How to fix Uniden TRU9280 when charge LED won’t illuminate?
If the charge LED on your Uniden Cordless Telephone doesn't light up when you place the handset in the cradle, ensure the AC adapter is properly connected to both the base (or charger) and the wall outlet. Also, verify that the handset is correctly seated in the cradle and that the charging contacts are clean.
Why doesn’t my Uniden Cordless Telephone ring or receive a page?
If the handset of your Uniden Cordless Telephone doesn’t ring or receive a page, make sure you are not too far from the base and that your handset is registered to the main base unit. Fully charge the battery in the handset for 15 to 20 hours by placing it on the base or charging cradle. You can also try changing the Digital Security Code.
How to reduce noise interference on Uniden Cordless Telephone?
If you are experiencing severe noise interference with your Uniden Cordless Telephone, keep the handset away from potential sources of interference such as microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and other electrical appliances. Alternatively, try moving to another location or turning off the source of interference.
What to do if my Uniden TRU9280 Cordless Telephone can't make or receive calls?
If your Uniden Cordless Telephone can't make or receive calls, first, ensure you are not too far from the base. Verify that the line is not already in use for an outside call. Confirm that your handset is registered to the main base unit. Check both ends of the base telephone line cord and make sure the AC adapter is plugged into the base and wall outlet. You can also try disconnecting and reconnecting the AC adapter. As a last resort, change the Digital Security Code.
Why does Caller ID not display on my Uniden Cordless Telephone?
If the Caller ID is not displaying on your Uniden Cordless Telephone, it might be because the call was placed through a switchboard. Contact your telephone provider to verify that your Caller ID service is active and current, as there may be an issue with the service itself.
How to improve weak audio on Uniden Cordless Telephone?
If the audio sounds weak on your Uniden Cordless Telephone, move the handset and/or base away from metal objects or appliances and try again. Also, ensure that you are not too far from the base.
What to do if Uniden TRU9280 Cordless Telephone answering system does not work?
If your Uniden Cordless Telephone answering system isn't working, ensure the base is plugged in and the answering system is turned on. Also, make sure that the message record time is not set to announce only.
Why are messages incomplete on my Uniden Cordless Telephone?
If messages are incomplete on your Uniden Cordless Telephone, it may be because incoming messages are too long, so ask callers to leave brief messages. Also, the memory might be full, so try deleting some or all of the saved messages.
How to fix Uniden TRU9280 when handset doesn’t communicate with other handsets?
If the handset of your Uniden Cordless Telephone doesn’t communicate with other handsets (Multi-handset packs only), change the Digital Security Code.
Why is there no sound during call monitoring on my Uniden Cordless Telephone?
If there is no sound on the base or handset speaker of your Uniden Cordless Telephone during call monitoring or message review, adjust the speaker volume on the base or handset. Also, make sure the call screen feature is set to on.
General| Number of Handsets | 1 |
|---|---|
| Caller ID | Yes |
| Call Waiting | Yes |
| Memory Dial | Yes |
| Backlit Display | Yes |
| Power Source | AC Adapter |
| Type | Cordless Phone |
Guidance on choosing location, installing battery, connecting phone line, and initial charging.
Covers initial setup, language selection, and changing the dial mode.
Instructions for creating, finding, editing, deleting, and copying phonebook entries.
Procedures for making, answering, and hanging up calls.
Using Caller ID lists, making calls from records, and handling call waiting.
Adjusting volume, audio tone, and clarity boost for better sound.
Setting language, rings, time, greetings, record time, alerts, screening, and PIN.
Turning the system on/off, reviewing messages, and screening calls.
Accessing and controlling the answering system remotely.
Covers conference, transfer, muting, privacy, intercom, and dialing.
Guides for common problems, solutions, and liquid damage procedures.
Includes warnings, safety instructions, FCC/IC notices, and radio interference.
Details specifications, battery care, cleaning, and warranty information.
To Next Page
