Why can't I access Uniden TRU9280 answering system from a remote phone?
If you cannot access the answering system on your Uniden Cordless Telephone from a remote phone, ensure you are using the correct PIN number. Also, verify that the touch-tone phone you are using can transmit the tone for at least two seconds; if it cannot, try using a different touch-tone phone.
General| Number of Handsets | 1 |
|---|---|
| Caller ID | Yes |
| Call Waiting | Yes |
| Memory Dial | Yes |
| Backlit Display | Yes |
| Power Source | AC Adapter |
| Type | Cordless Phone |
Guidance on choosing location, installing battery, connecting phone line, and initial charging.
Covers initial setup, language selection, and changing the dial mode.
Instructions for creating, finding, editing, deleting, and copying phonebook entries.
Procedures for making, answering, and hanging up calls.
Using Caller ID lists, making calls from records, and handling call waiting.
Adjusting volume, audio tone, and clarity boost for better sound.
Setting language, rings, time, greetings, record time, alerts, screening, and PIN.
Turning the system on/off, reviewing messages, and screening calls.
Accessing and controlling the answering system remotely.
Covers conference, transfer, muting, privacy, intercom, and dialing.
Guides for common problems, solutions, and liquid damage procedures.
Includes warnings, safety instructions, FCC/IC notices, and radio interference.
Details specifications, battery care, cleaning, and warranty information.
To Next Page
