USING YOUR PHONE [40]
www.uniden.com
Resetting the New Message LED and Envelope icon
If the LED remains on or the envelope icon still appears after you’ve retrieved your
messages, you may need to reset the indicators. With the phone is in standby mode,
press and hold flash/find handset on the base until the paging sound stops (about
5 seconds).
Find Handset
To locate the handset, press flash/find handset on the
base when the phone is in standby mode. All registered
handsets beep for 60 seconds, and
Paging
appears on
the handset display. To cancel paging, press any key on
the handset or flash/find handset on the base.
If the battery pack is
completely drained, the
handset will not beep.
note
USING YOUR PHONE
UP772.book Page 40 Monday, August 29, 2005 1:15 PM
To Next Page
Loading...
Need help?
General
