Operation
Handheld UHF-CB Transceiver
Priority Channel Watch During Group Scan
The feature allows user to monitor the Instant Priority channel every 1.5
seconds during Group Scanning.
1. Press [MENU/MEM] 5 times. PRI setting ashes.
2. Press or to change the setting on or off.
3. Press & hold [MENU/MEM] to save and exit.
Drop-Out Delay
While scanning, the radio stops at a busy channel and receives a signal.
When the received signal is over, the unit will wait for 2 seconds for the
return of the signal, otherwise, the radio resumes scanning.
Recalling the Instant Channel
Programming the Instant Priority Channel
1. Press [MENU/MEM] 6 times. PRI and current channel
setting ashes.
2. Press or to select the desired channel.
3. Press & hold [MENU/MEM] to save and exit.
To Next Page
Loading...
Need help?
General
