Roger Beep
Roger Beep is a BEEP that is sent to notify the end of transmission
(both PTT and VOX transmission.) Roger Beep can be heard through
the speaker when Key Beep is on. Roger Beep is transmitted even if
Key Beep is turned off. However, Roger Beep will not be heard from the
speaker.
1. Press [MENU/MEM] 11 times.
rb setting flashes.
2. Press or to change the setting
on or off.
3. Press & hold [MENU/MEM] to save and exit.
Key Beep
Assures the user that the keypad has been properly
pressed by emitting a beep tone. This tone can be
switched on or off.
1. Press [MENU/MEM] 12 times.
bP setting flashes.
2. Press or to change the setting
on or off.
3. Press & hold [MENU/MEM]
to save and exit.
23
Handheld UHF-CB Transceiver
UNIDEN UH820
To Next Page
Loading...
Need help?
General
