Uniden UM625C User Manual

41
Using the WHAM and WHAM x 4 Sub Menus
(Wireless Handheld Access Microphone)
This option lets you set up a WHAM (900MHz — up to 2 mics) or WHAM x 4 (2.4GHz — up
to 4 mics) wireless microphone to operate with the radio. You must first set up a WHAM or
WHAM x 4 microphone before it will work with the radio.
Note:
Refer to your WHAM or WHAM x 4 microphone’s owners manual for more information
about connecting it to the radio.
WHAM units use a control or base unit, external to the radio. WHAM x 4 do not.
A sub unit is another radio on board.
Rotate PUSH/SELECT to select
WHAM x 4 or WHAM, then press PUSH/SELECT to select
it. If you have already connected a WHAM control (base) unit to the radio,
BASE ID and LINK
CH
appear. Wen you connect a WHAM unit, a mic icon appears in the lower left of the chan-
nel display screen. If you have not connected a WHAM base unit to the radio,
BASE ID,
BASE/SUB, CHANGE LINK, and RENAME appear.
To set up a WHAM x 4 Base ID, see “Setting a WHAM x 4 Base ID” on Page 41. To set up a
WHAM x 4 base/sub, see “Setting the WHAM x 4 Sub Radio Mode” on Page 41. To set up a
WHAM Base ID, see “Setting a WHAM Base ID”. To set up a WHAM link channel, see
“Changing the Radio Link Channel for a WHAM x 4” on Page 42.
Setting a WHAM x 4 Base ID
The base ID between the radio and the WHAM x 4 microphone you are installing must be the
same.
1. Rotate PUSH/SELECT to select
BASE ID, then press PUSH/SELECT to select it. BASE
ID
and a channel number appear.
2. Rotate PUSH/SELECT clockwise to move forward through the displayed numbers or
counterclockwise to move backward. When the desired number appears, press PUSH/
SELECT to select it. A confirmation screen appears.
3. If the base ID you set appears correctly, rotate PUSH/SELECT to select
YES. The radio
saves the base ID you input. Otherwise, rotate PUSH/SELECT to select
NO.
Setting the WHAM x 4 Sub Radio Mode
You can set up the radio so connected WHAM x 4 microphones can communicate with each
other.
1. Rotate PUSH/SELECT to select
BASE/SUB, then press PUSH/SELECT to select it.
BASE RADIO and SUB RADIO appear.
2. To turn on the sub radio mode, rotate PUSH/SELECT to select SUB RADIO, then press
PUSH/SELECT to confirm it. The sub radio mode is turned on.
Otherwise, to turn off the sub radio mode, rotate PUSH/SELECT to select
BASE RADIO,
then press PUSH/SELECT to confirm it.
Using the Setup Screen

Uniden UM625C Specifications

General

Brand	Uniden
Model	UM625C
Category	Two-Way Radio
Language	English