More features 83
Using the handset to open the door opener during a call
> < [Select the menu item and confirm.
Using the handset to open the door opener without holding a
conversation
c Press and hold down the Talk key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
o Enter the internal phone number for the door opener. The door is opened.
a Press the End call key to end the operation.
Activating the door release
This function only works if it has been configured by the service engineer.
c Press and hold down the Talk key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
o Follow the user guidance system from this point onwards. Enter the internal
phone number of the door opener, as well as the code and type of door release:
• 1=enable with ring,
• 2=enable w/o ring,
• 3=change password.
[ Confirm your entries.
a Press the End call key to end the operation.
Deactivating the door opener
c Press and hold down the Talk key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
a Press the End call key to end the operation.
Note:
Standard code "00000". To change the code, confirm option "3=change
password". Follow the user guidance system.
To Next Page
Loading...
Need help?
General
