More features 89
Parking/activating calls
You can park up to ten calls (i.e. place them on hold) and then reactivate them
at other telephones in your communication system.
Parking a call
p You are on a call you wish to park.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
o Enter the parking position number (0... 9) and note it down.
If the parking position number entered is already in use, you have to enter
another one.
Picking up a specific parked call
Prerequisite:
One or more calls have been parked. Your handset is in stand-by status.
c Press and hold down the Talk key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
o Enter the parking position number you have noted.
Note:
If a parked call is not picked up, it returns to the station from which it was
parked after a certain time (= recall). The following appears on the display
"Recalling: (phone no. or name)" or "recalling from (phone no. or name)".
To Next Page
Loading...
Need help?
General
