forwardings via the telephone menu's call settings.
Permanent call forwarding (always)
All incoming calls will be forwarded directly to the predefined telephone number.
Forward if busy (busy)
New calls will be forwarded immediately, when coming in during an active call. This call
forwarding option functions only, if the Call Waiting function is deactivated.
Delayed call forwarding (no answer)
Call forwarding condition: You do not answer the incoming call within a defined time period
(timeout). The timeout can be set to 5, 10, 15 or 20 seconds. Where should the incoming call be
forwarded after the specified time has elapsed? The caller receives a call waiting signal and is
then forwarded to the defined destination.
If unavailable (not registered)
The option functions only if the end device is not registered to the telephone system:
When the Internet connection fails or there is no LAN connection.
and
If “call forwarding …if unavailable” is programmed for a direct extension (e.g. extension 123
- John Doe) and a caller calls the direct dial number for the extension directly, call
forwarding applies. If the extension is a member of a queue or a group and the queue or
group receives a call, call forwarding for the individual extension no longer applies! In
general, the destination should always be an available destination number. I.e., make sure
that no voicemail or announcement comes on.
Always depose an available telephone number as
target. Ensure that no voice mail or other announcement
picks up automatically.
When disconnecting the connection between the end
device and the telephone system, it can take up to 60
seconds for the call forwarding to work. Once the end
device is reconnected to the telephone system, it can
take up to 60 seconds for it to register.
To Next Page
Loading...
Need help?
General
