Unify OpenStage 40 - Page 2

www.evotec.com.au / 1300 133 996
Unify OpenStage 40 User Guide
TO SWITCH FROM HANDPIECE TO HANDSET:
While on a call, to switch from handpiece to handset:
1. Hold the
Speaker
key down.
2. Replace handpiece.
3. Remove finger from
Speaker
key.
CHANGING RING VOLUME:
This function must be completed with the handpiece in
place.
1. Press the
Plus
or
Minus
key.
“
Ringer Volume?
” will appear on the display.
2. Press
OK
key to confirm.
3. Press
Plus
key to increase volume, or
Minus
key to
decrease volume.
4. Press
OK
key to save.
CHANGING RING TONE:
This function must be completed with the handpiece in
place.
1. Press
Plus
or
Minus
key.
2. Scroll down to “
Ringer Tone?
”.
3. Press
Tick
key to confirm.
4. Press the
Plus
or
Minus
keys to select a ring tone for
your incoming calls.
5. Press the
OK
key to save.
CHANGING CALL/SPEAKER VOLUME:
While on a call, to adjust the call volume or speaker
volume:
1. Press the
Plus
or
Minus
key.
“
Speaker Volume
” will appear on the display.
2. Press
Plus
key to increase volume, or
Minus
key to
decrease volume.
3. Press the
OK
key to save.
The OK and Navigator keys are essential to the simple operation of the Siemens Openstage
handsets. The
Display
area shows functions relevant to the current call status. The
OK
key is a
confirmation of the displayed question.