Unilumin Upanel 1.2S User Manual

Chapter 3 LED Display Control Setting
33
4) Save the correction coefficients to the hardware (Use similar steps in setting
coefficients for a new receiving card. For details, refer to Step 4, Step 5, and Step 6
in Section 3.5.1) so that they are retentive after a power failure.
Figure 3-23 Obtaining Correction Coefficients for a New Module

Unilumin Upanel 1.2S Specifications

General

Brand	Unilumin
Model	Upanel 1.2S
Category	Monitor
Language	English