Unilumin Upanel 1.2S User Manual

Chapter 6 Troubleshooting and Component Replacement
66
6.2.3 Replacement of Power/Signal Input Cable Switching Board
Replace switching board of the LED display based on the following steps:
Step
Picture Instruction
Operation
1
Disconnect the signal
cable, remove the fixed
screws of power cable
and signal switching
board.
2
Pull it down gently to
take it out of cabinet
hole.
3
Maintenance or
replace the power and
signal interface.

Unilumin Upanel 1.2S Specifications

General

Brand	Unilumin
Model	Upanel 1.2S
Category	Monitor
Language	English