Unimig VIPER MULTI165 - TIG: Machine Setup

44
VIPER MULTI 165
OPERATING MANUAL
16. TIG: Machine Setup
ON
OFF
GAS IN
STEEL
0.6
2T
4T
0.8
0.9
1.0
SYNERGIC
FLUX CORED
STAINLESS
ALUMINIUM
S
T
A
N
D
A
R
D
1. Connect the TIG torch to the negative (-) dinse
connection, twist to lock in place.
2. Connect the earth clamp to the positive (+) dinse
connection, twist to lock in place.
3. Connect the plug into a 10 AMP power point, then
switch the machine ON.
4. Select TIG from the MIG/TIG/MMA selector.