Unison Research
Unico Secondo
10
USER MANUAL
First of all may we sincerely thank you for choosing this Unison
Research
audio component. All our products are made with great care
and pride, and we hope that your new purchase will give you many years of
satisfaction and musical pleasure.
Please take a little time to read the following notes. They will help
you to get the best from your new Unison Research
Unico Secondo.
Every Unison Research
product is the fruit of great experience in
electronic design as well as a profound knowledge of vacuum tubes and
how to get the best performance from them. It is also the result or our
passion for making unique and valuable pieces of audio equipment in which
traditional craftsmanship and advanced electronics join together in
harmony.
All our products are made using fine quality materials and each one is
inspected at various stages of the production process to ensure that it meets
our own very high standards.
1. UNPACKING
Please check that the packaging is intact and that the product has not
suffered from rough handling during transport. If you are in any doubt, we
recommend that you contact your Authorised Dealer for advice before
proceeding to install it.
IMPORTANT ! After unpacking allow time for the product to reach
normal room temperature before connecting up and switching on. This
is to allow any condensation to dissipate, which might otherwise cause
damage to the electronics. Remember also that condensation can form
when moving the amplifier from a cold place to a warm room.
Keep the packaging in a safe place. Any time you need to transport the
amplifier it will be best packed safely in its original carton.
To Next Page
Loading...
Need help?
General
