Unit Connection Technology WS0300 - Recommend Tools; Sensor Assembly Set up

3
QTY Item Image
1 Manual
1 Power Adapter
Figure 1
3.2RecommendTools
● Precision screwdriver (for small Phillips screws)
● Compass or GPS (for wind direction calibration)
● Adjustable Wrench
● Hammer and nail for hanging remote thermo-hygrometer transmitter.
3.3 Sensor Assembly Set Up
The following illustration shows the full segment for Thermo-Hygrometer，WIND,RAIN
and UV INDEX sensor. purposes only ,as shown in Figure 2.
Figure 2