Management
Change Password
You can have your desired password by changing password.
1. Take the following steps to change password.
2. Enter your currently-used password in the current field.
3. Enter your new password in the New Password field.
4. Re-enter the new password to confirm it in the Repeat New Password field.
5. Finally, click “Apply” to save the change.
(Also, if you desire to restore to the factory-set password, please click “Yes”. The default setting is disabled.)
SNMP Setup
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
30
To Next Page
Loading...
