Need help?Do you have a question about the Unitech PA692 and is the answer not in the manual?
General| Touchscreen | - |
|---|---|
| Display diagonal | 3.7 \ |
| Display resolution | 800 x 480 pixels |
| ROM capacity | 512 MB |
| Internal memory | 0.512 GB |
| Internal memory type | DDR |
| Compatible memory cards | MicroSD (TransFlash) |
| Built-in processor | Yes |
| Processor frequency | 1 GHz |
| Processor manufacturer | Texas Instruments |
| Operating system installed | Android |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g |
| Bluetooth version | 2.1+EDR |
| Certification | CE, FCC, BSMI, VCCI, CCC, RoHS |
| Product color | Black |
| Keyboard layout | Alphanumeric |
| Linear (1D) barcodes supported | Code 11, Code 128, Code 128A, Code 128B, Code 128C, Code 32, Code 39, Interleaved 2 of 5 |
| International Protection (IP) code | IP65 |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Composite Codes, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, Small Aztec Code, TLC-39 |
| Rear camera resolution (numeric) | 5 MP |
| Storage temperature (T-T) | -10 - 50 °C |
| Operating temperature (T-T) | -20 - 60 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Weight and Dimensions| Depth | 74 mm |
|---|---|
| Width | 177 mm |
| Height | 40 mm |
| Weight | - g |
Describes the manual's purpose, scope, and content.
Explains FCC compliance rules and potential interference.
Details FCC RF exposure guidelines for safe device usage.
Provides safety information and specifications for the device's laser scanner.
Details optimal charging practices, temperature limits, and storage for battery longevity.
Welcomes the user and introduces the PA692 Rugged Handheld Computer.
Lists the key hardware and software features of the PA692 device.
Visually presents the PA692 terminal and its included accessories.
Details the main components and physical layout of the PA692 device.
Details the components located on the front and right side of the PA692.
Details the components located on the rear and left side of the PA692.
Guides the user on turning on the device and installing the battery.
Explains the procedure for charging the PA692 battery for first use and subsequent charges.
Explains LED indicators and how to check battery status.
Details the layout and function of the device's keypads and buttons.
Explains how to use function key combinations for various device operations.
Describes how to input text using the alpha keys in different modes.
Explains the use of the MicroSD card slot for storage and data transfer.
Explains the function of the SIM card slot for GPRS connectivity.
Describes how to operate the integrated barcode laser scanner.
Details how to configure barcode scanner settings like symbologies and data transmission.
Guides the installation of Microsoft ActiveSync for PC synchronization.
Details the steps to establish a connection between the PA692 and a PC.
Explains how to set up and connect to a wireless network using Summit Utilities.
Introduces and guides the use of u-CenterMobile for GPS data acquisition.
Details how to configure barcode scanner settings like symbologies and delimiters.
Explains the Scan2Key application for emulating keypad input from the scanner.
Lists supported 1D barcode symbologies and their configuration options.
Lists supported 2D barcode symbologies and their configuration options.
Provides methods for performing a warm boot to restart the device.
Details the procedure for performing a cold boot to reset factory settings.
Explains how to perform a clean boot for factory default settings.
Covers RFID Search Light setup and application parameter configuration.
Explains RFID tag display formatting and read parameter settings.
Details RFID reader configuration like power, region, and tag selection.
Provides instructions on starting, stopping, and managing RFID tag readings.
Lists safe cleaning agents and active ingredients for device maintenance.
Lists harmful chemicals and advises on glove usage to prevent damage.
Provides step-by-step instructions for daily and monthly device cleaning.
To Next Page
