Unitech PA692 User Manual

- 45 -
1. Dampen a soft cloth with one of the approved cleaning agents listed above
or use pre-moistened wipes:
a. Never apply liquid directly to the MCA models.
b. Do not let liquid pool around the display window or any other area on the
device.
2. Gently wipe all surfaces, including the front, back, sides, top and bottom --
do not wrap the device in the cloth or pre-moistened wipe.
a. Special instructions when cleaning the front of the device:
● Besuretocleanthekeysandbetweenthekeys(useacotton-tipped
applicatortoreachbetweenthekeys).
● Aftercleaning,immediatelydrythedisplaywithasoftnon-abrasive
cloth to prevent streaking.
3.`Allow the unit to air dry before use.
MONTHLY ‘DEEP CLEANING MAINTENANCE
Keep your Unitech MCA models and cradle in good working order with a
regular comprehensive cleaning routine to remove the natural build-up of dirt
that occurs with everyday use on connectors and the scanner exit window as
well as the main surfaces of the device.
1. Housing: Follow the instructions for daily cleaning and disinfecting above to
give the housing a general cleaning.
2. Scanner exit window: Wipe the scanner exit window with a lens tissue or
other material suitable for cleaning optical materials such as eyeglasses.
3. MCA model connector:
a. Remove the main battery from MCA model and close the battery door.
b. Dip the cotton portion of a cotton-tipped applicator in isopropyl alcohol.
c. Rub the cotton portion of the cotton-tipped applicator back-and-forth
across the connector on the Unitech MCA model. Do not leave any
cotton residue on the connector.
d. Repeat at least 3 times.
e. Use the cotton-tipped applicator dipped in alcohol to remove any grease
and dirt near the connector area.

Unitech PA692 Specifications

General

Touchscreen	-
Display diagonal	3.7 \
Display resolution	800 x 480 pixels
ROM capacity	512 MB
Internal memory	0.512 GB
Internal memory type	DDR
Compatible memory cards	MicroSD (TransFlash)
Built-in processor	Yes
Processor frequency	1 GHz
Processor manufacturer	Texas Instruments
Operating system installed	Android
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.1+EDR
Certification	CE, FCC, BSMI, VCCI, CCC, RoHS
Product color	Black
Keyboard layout	Alphanumeric
Linear (1D) barcodes supported	Code 11, Code 128, Code 128A, Code 128B, Code 128C, Code 32, Code 39, Interleaved 2 of 5
International Protection (IP) code	IP65
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, Small Aztec Code, TLC-39
Rear camera resolution (numeric)	5 MP
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	5 - 95 %
Headphone outputs	1
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.

Weight and Dimensions

Depth	74 mm
Width	177 mm
Height	40 mm
Weight	- g