Need help?Do you have a question about the Unitech HT630 and is the answer not in the manual?
General| Display diagonal | - \ |
|---|---|
| Display resolution | 128 x 64 pixels |
| Display number of colors | Monochrome |
| ROM capacity | 0.256 MB |
| Internal memory | 0.0005 GB |
| Internal memory type | RAM |
| Compatible memory cards | Not supported |
| Maximum internal memory | 4.5 MB |
| Processor family | - |
| Processor frequency | 0.8 GHz |
| Interface | RS-232 |
| Storage temperature (T-T) | 0 - 50 °C |
| Operating temperature (T-T) | -20 - 70 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Battery capacity | 120 mAh |
| Battery life (max) | 12 h |
| Battery recharge time (off) | 2.5 h |
| Certification | BSMI, CCC, CE, FCC, VCCI, RoHS |
| Product color | Blue |
| Barcode reader | Yes |
| Keyboard layout | Alphanumeric |
| Keypad number of keys | 27 |
Weight and Dimensions| Depth | 35.1 mm |
|---|---|
| Width | 67.1 mm |
| Height | 167.64 mm |
| Weight | 243.81 g |
Provides a general overview of the HT630 device and its features.
Information on how to contact Unitech for support and product inquiries.
Discusses potential pre-configuration by system integrators and its impact on manual applicability.
Details physical and performance characteristics of the HT630 device.
Guides users to quickly familiarize themselves with the HT630 device.
Details the HT630's communication ports and connection methods.
Explains the different modes and operation of the HT630 keyboard.
Information on using the built-in laser scanner module for data input.
Overview of programming options for developing applications on the HT630.
Explains the main and backup power sources for the HT630 terminal.
Steps for removing and installing the main battery pack.
Instructions for charging the main and backup batteries.
Describes cradle LED icons and power status indicators.
Describes warning messages and indicators for low main and backup battery levels.
Provides instructions for replacing the main and backup batteries.
Details the process for recharging the HT630's battery pack.
Guidelines for safe storage and handling of batteries.
Describes the terminal's state after power-on and warm-start.
Explains how to access and use system commands in User mode.
Details system configuration options available via the SET command.
Configuration options for scanner, display, keypad, Bluetooth, and exiting settings.
Using ESC commands for data upload/download via Kermit server.
Defines data field and record specifications for FormCaching application.
Step-by-step guide on creating a FormCaching application.
Instructions on executing the FormCaching application and data handling.
Details the default configuration settings for FormCaching.
Outlines the steps required to install and configure WiFi settings.
Instructions for configuring the HT630 using the monitor application.
Steps to modify the HT630's IP address, subnet mask, and gateway.
Explains static vs DHCP IP addressing, netmask, and gateway settings.
Configuration for SSID, network type (Infrastructure/Ad-hoc), and channel.
Details configuration for SSID, network type, and channel selection.
Settings for network authentication and data encryption (WEP, WPA-PSK).
Options for changing passwords, SNMP setup, firmware upgrade, and backup/restore.
Procedure for changing the device's password.
Configuration for Simple Network Management Protocol (SNMP).
Process for upgrading the HT630's firmware.
Features for backing up and restoring device settings.
Options to reboot the HT630 device.
To Next Page
