Unitech PA692

- 38 -
Display format
Wedge display format setup
1. EPC in Hex : Show the tag with Hex format
2. EPC in Base36 : Show the tag with Base36
format
3. Save : Save the setting
4. Cancel : Exit this page without saving
5. Restore Defaults : Restore the setting
Read Parameters
1. Audible Alerts : Reading sound enable/
disable
2. Read Alert Wav File : Get tag’s sound
3. Start Scan Wav File : Start reading’s sound
4. End Scan Wav File : End reading’s sound
5. Scan Duration in Seconds : Wedge reading
duration
6. Metadata Separator : Tag data separator
symbol
7. Time Stamp : Enable/Disable the time
information in tag metadata
8. RSSI : Enable/Disable the RSSI information
in tag metadata
9. Save : Save the setting
10. Cancel : Exit this page without saving
11. Restore Defaults : Restore the setting