Unitech MS100 User Manual

36 MS100 Manual
Code 39 / I 2 of 5 / S 2 of 5 / Code 32 / Telpen / UCC/EAN128, continued
0
1
2
3
4
5
6
7
8
9
Exit
MM
Min. Length
NN
Max. Length
To define minimum or maximum acceptable
bar code data length, after scanning the
parameter code (F1, F2, or F3) scan the
“MM” or “NN” to the right, scan the number(s)
to the left, and then scan the “MM” or “NN”
again. Then scan “Exit” as usual.
Define Minimum and Maximum Length
Define a Separator for Double Labels:
Scan from the ASCII Code chart (pages 44 to
47) to select a new separator for double labels
F8
Scan from the ASCII Code chart (pages 44 to
47) to define a new fields separator
Define the EAN128 Fields Separator:
F7
Note: If EAN128 is disabled, EAN128 labels
will be decoded as Code 128
UCC/EAN 128:
0/1 - Disable / Enable
2/3 - Code ID Disable / Enable
F6
2/3 - Standard / Numeric Set
Telepen:
0/1 - Disable / Enable
F5
4/5 - Tailing Character Send / No Send
Code 32 (Italian Pharmacy):
0/1 - Disable / Enable
2/3 - Leading Character Send / No Send
F4

Unitech MS100 Specifications

General

Wavelength	660 nm
Sensor type	Photo diode
Tilt reading angle	45 - 90 °
Dimensions (WxDxH)	140 x 30 x 23 mm
Cable length	1.80 m
Standard interfaces	RS-232
Power consumption	800 mA
Power requirements	5V DC
Product color	Black, Blue
Housing material	Plastic
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Weight	76.5 g