Unitech MS100 User Manual

38 MS100 Manual
Code 128 / MSI / Code 93 / Code 11 / Codabar / Label Code, continued
0
1
2
3
4
5
6
7
8
9
Exit
0/1 - Disable / Enable
2/3 - Checksum send / No send
Label Code IV and V:
G6
To define minimum or maximum acceptable
bar code data length, after scanning the
parameter code (G1 through G5) scan the
“MM” or “NN” to the right, scan the number(s)
to the left, and then scan the “MM” or “NN”
again. Then scan “Exit” as usual.
Define Minimum and Maximum Length
MM
Min. Length
NN
Max. Length
0/1 - Disable / Enable
2/3 - Start & Stop Send / No Send
4 - Check Digit Calculate & Send
5 - Check Digit Calculate but not Send
6 - Check Digit not Calculate
7/8 - CLSI Format On / Off
3 ~ 48 - Min Length 3 / Max Length 48
Codabar:
(See below for Min./Max. Length procedure)
G5

Unitech MS100 Specifications

General

Wavelength	660 nm
Sensor type	Photo diode
Tilt reading angle	45 - 90 °
Dimensions (WxDxH)	140 x 30 x 23 mm
Cable length	1.80 m
Standard interfaces	RS-232
Power consumption	800 mA
Power requirements	5V DC
Product color	Black, Blue
Housing material	Plastic
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Weight	76.5 g