Unitech MS84XG

39
Appendix C
Setup Menu
D.1 Beeps and Delays
Enter Group 2
Group Default
Beep Tone:
0 – None
1 -- Low
2 -- Medium
3 -- High
4 -- Low to High
5 -- High to Low
A1
Interblock Delay:
0 -- 0 ms
1 -- 10 ms
2 -- 50 ms
3 -- 100 ms
4 -- 500 ms
5 -- 1 seconds
6 -- 3 seconds
7 -- 5 seconds
A2
Intercharacter Delay:
0 -- 0 ms
1 -- 1 ms
2 -- 2 ms
3 -- 5 ms
4 -- 10 ms
5 -- 30 ms
6 -- 50 ms
7 -- 100 ms
A 3
Power Saving Mode:
0 -- 10 minutes
1 -- 30 minutes
2 -- 60 minutes
3 -- 240 minutes
When disconnecting for more than 10 /30
/60 /240 minutes, the scanner stops
searching for connection and then enters
the power saving mode.
When the scanner enters the power saving
mode, you can press the trigger to release
the power saving mode. The RF module
will reconnect.
A
4
PharmaCode (Ease on decoding)
0 -- Disable
1 -- Enable
A5
Reserve
A6
0
1
2
3
4
5
6
7
8
9
Exit