Unitech MS910 User Manual

9
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Smartphone/ Tablet PC Connection (iOS)
1. Pair with the scanner via [HID]; see topic
“Connecting via Human Interface Device (HID)
Mode”.
2. Scan the numeric barcode according to the
pincode generated by the Bluetooth
application.
3. The scanner will beep twice to verify the
successful connection.
Note: No special application needs to be installed
when the scanner is connected to iOS smartphone/
tablet PC via HID mode.
To get the detailed example of HID setting, refer to Appendix 2.
Set Bluetooth Device ID
To customize your own Bluetooth device (MS910) name for the wireless scanner, please follow
below steps:
STEP 1
Scan the Default Wireless ID barcode. .B022$
*.B022$*
STEP 2
Scan the Set Wireless ID barcode. .B023$
*.B023$*
STEP 3
Scan 7 alphanumeric characters from Full ASCII Chart of Appendix A.
STEP 4
Scan the Set Wireless ID barcode. .B023$
*.B023$*
STEP 5
Scan a desired BT mode barcode (SPP or HID) to connect.
*Note:
1. If you have connected the scanner with the host BEFORE customizing your Bluetooth device name, please
remove the device and create a new connection to make sure device name is refreshed. For PC, it is
recommended to restart the Bluetooth adaptor in order to refresh device name.
2. At Step 3, the scanner will beep three times as an alert that more than 7 characters are entered.

Unitech MS910 Specifications

General

Type	Handheld bar code reader
Wavelength	625 nm
Sensor type	CCD / CMOS
Scanner type	1D/2D
Read rate (max)	240 reads/s
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), MSI, Plessey, Telepen, U.P.C.
2D (matrix & stacked) barcodes supported	Compact Matrix Code, Data Matrix
Wireless range	10 m
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Certification	CE, FCC ClassB
Product color	Black, Blue
LED indicators	Yes
Housing material	Acrylonitrile butadiene styrene (ABS)
Cables included	USB
Battery voltage	3.7 V
Power consumption	150 mA
Power source type	Battery
Number of reads per charge	5000
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	65 mm
Width	24 mm
Height	18 mm
Weight	24.6 g