To Next Page

To Previous Page

- 7 - - 8 -

INTERFACE SELECTION INTERFACE SELECTION

There are 5 interfaces for data transmission/collection:

1. BT HID - Emulates a Bluetooth HID keyboard

that transmits

each barcode data to the host after decode. This

interface is recommended for Bluetooth connection.

(See page 9 for details)

2. BT SPP - Emulates a Bluetooth SPP device that transmits

each barcode data to the host after decode.

(See page 9 for details)

3. Batch Mode - Emulates a USB mass storage device

that saves each barcode data during

off-line data collection (See page 25)

4. USB HID - Emulates a USB keyboard that transmits each

barcode data to the host after decode. This

interface is recommended for tethered connection.

5. USB VCP - Emulates a USB virtual com device that

transmit each barcode data to the host after

decode.

. C006$

*.C006$*

USB VCP

. C008$

*.c008$*

USB HID

Batch Mode

(MS912M+ only)

BT SPP

. C035$

*.c035$*

BT HID

. E042$

*.E042$*

. E043$

*.E043$*

Unitech MS912+ Quick Guide

Other manuals for Unitech MS912+