Unitech MS916

- 10 -
Top
Menu
Sub Menu Level 1 Sub Menu Level 2 Options/Result Default Setting
4. Data Separator CR/None/TAB/CRLF/LF CR
5. Sending BlkDly
SENDING BlkDelay
500 ms / 100 ms/ 50 ms / 10 ms/ 3 Sec. / 1 Sec.
10 ms
6. Date / Time Stamp
Date Stamp Settings
Disable *
YYYY-MM-DD
YYYY/MM/DD
YYYY.MM.DD
YYYYMMDD
MM-DD-YYYY
MM/DD/YYYY
MM.DD.YYYY
MMDDYYYY
DD-MM-YYYY
DD/MM/YYYY
DD.MM.YYYY
DDMMYYYY
Time Stamp
Settings
Disable *
HH:MM:SS
HH:MM:SS AM
HHMMSS
HHMMSSAM
HH:MM
HH:MM AM
HHMM
HHMMAM
Disable
7.1 Set Lookup Enable/Disable Disable
7.2 Download Lookup
7.LOOKUP TABLE
7.3 Exit
8. Exit Return to the previous menu N/A
1. BT Pairing BT Pairing in progress (Press any key to cancel ) N/A
2. BT MAC Address Show BT MAC Address N/A
3. Paired Device Show BT paired Name and MAC Address N/A
4. Remove Pair 4.1 Remove Current BT Pair ?
Yes/No (If a BT device has been paired with
MS916)
No
5. Signal Strength Enable/Disable Enable
6. BT FW Version Show BT Firmware Version N/A
BT CFG
7. Exit Return to the previous menu N/A
1. Beeper Volume High/Medium/Low/Mute Medium
2.Vibrator Enable/Disable Disable
3.1 Good Read Beeper&Vibrator/Vibrator/Beeper/None Beeper
3.2 Connection Beeper&Vibrator/Vibrator/Beeper/None
Beeper
3.3 Button Beeper&Vibrator/Vibrator/Beeper/None
Beeper
Beep &
Vibrate
3. Indicators
3.4 System Setting
Beeper&Vibrator / Vibrator/Beeper/None
Beeper