- 74 -
4.3 Output data transmit
4.3.1 Auto mode
In this mode, when scanner is out off BT transmit range, the scanned data will be
stored in the memory and transmit data automatically when back to in-range.
Auto mode*
4.3.1.1 Erase last memory entry
Scan below bar code to erase last scanned data in memory
Erased Last Memory Entry
4.3.1.2 Erase all data in buffer (Erase Memory)
Scan below bar code to erase all data in the memory
Erase Memory
4.3.1.3 Check buffer memory space
Scan below bar code to check buffer memory space
Free Memory Space
To Next Page
Loading...
