- 75 -
4.3.2 Wedge mode
In this mode, the data only transmit while the BT is connected
Wedge mode
4.3.3 Batch mode
In this mode, the scanned data will be stored in the memory all the time and
transmit data only when BT is connected by scanned the “send batch” bar
code
Batch mode
4.3.3.1 Send batch
Scan below bar code to send the stored data to host
Send Batch
4.3.3.2 Erase last memory entry
Scan below bar code to erase last scanned data in batch memory
Erase Last Memory Entry
To Next Page
Loading...
