Unitech MS916

- 78 -
4.4.2 HID keyboard inter-character delay
In BT HID mode, scan below bar code to set inter-character delay time. Default
is 1ms.
1 ms * 5 ms
10 ms 20 ms
4.4.3 HID keyboard Case
In BT HID mode, scan below bar code to change the alphabet case. Scan ‘’to
lower” barcode to output data in lower case; or scan “to upper” barcode to
output data in upper case. Default setting: “auto trace” to have original
scanned data transmitted.
Auto Trace * To Lower To Upper