7
Copyright 2011 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Calibrating the MT650 Screen
The calibrate screen automatically appears when the unit is powered-on for
the first time or after the system is reset.
The MT650 prompts you to calibrate the unit by tapping a sequence of screen
locations. Tap gently but firmly with the stylus.
When you have completed the series of taps, press the [E] key to confirm
calibration or press the [ESC] key to cancel it.
After confirming calibration, the Date/Time Properties screen appears
prompting you to set the date and time.
Setting the Date and Time
In the Date/Time Properties window, use the stylus to select the current date
and time, time zone, and daylight saving time option.
Tap the Left or Right arrows to scroll the year and month you desire or
directly tap location of year or month to change the year or month setting.
Tap on the Hr/Min/Sec AM/PM to input the Hr/Min/Sec to set the time.
Tap the arrow and set the correct time zone from the drop-down list.
Check the box to enable Windows to automatically adjust for daylight
saving.
Tap OK to save the settings and exit the Date/Time Properties dialog or
tap X to exit without saving.
To Next Page
Loading...
Need help?
General