Unitech PA600 Getting Started

Chapter 1 Getting Started
10
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Connecting the PA600 to a PC
Connect the PA600 to a PC with the USB Cable through the following:
1. Press and hold the USB Charging Cable’s Release Buttons while connecting to
the PA600 (1).
2. Connect the USB Charging Cable to the PC/Notebook’s USB Port and plug the
AC Adapter Cable into the USB Charging Cable’s power jack (2).
3. Plug the other end of the AC Adapter into an electrical outlet (3).
3
2
1

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm