@
sales@utplindia.in
+91 7046223333 , 9427301436
www.utplindia.in
www
UT-1401
DP INDICATOR AND SENSOR
8
Continue Configuration Mode
WARNING
PERSONAL INJURY :
Configuration should be performed only by personnel who are technically competent to do
so. Local Regulations regarding electrical & safety must be observed.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY.
Range / Values
Parameter
Display
: Baud Rate 4800
4800
: Baud Rate 9600
9600
: Baud Rate 19200
19.2k
Change value by key, or by key.
baud
9600
BAUD RATE [COMMUNICATION]
Baud Rate for Communication
Values :
Default Value : 9600
NOTE : Applicable if Communication Output.
:EvenParity
EvEn
:OddParity
Odd
: None Parity
none
Change value by key, or by key.
pr1t
none
PARITY [COMMUNICATION]
Parity check for Communication
Values :
Default Value : none
NOTE : Applicable if Communication Output.
Change value by key, or by key.
b-tm
0010
Buzzer Timer
Time Setting for buzzer in sec.
Values between :
Default Value : 0010
d-tm
0002
Demp. Timer
Value :between
Default Value : 0002
NOTE : Factory set value, don’t change.
Increase value by key, decrease by key.
0255
to
0000
0255
to
0000
To Next Page
Loading...