@
sales@utplindia.in
+91 7046223333 , 9427301436
www.utplindia.in
www
UT-1401
DP INDICATOR AND SENSOR
2
1. Introduction1
Function
Mount Anywhere
Two different configuration levels provide easy access to parameters. A4 digit security code perverts una-
uthorized changes. Parameters can also be hidden to user to prevent improper configuration of the unit
The UT-1401 product group is Process control instruments that must be panel mounted. The wiring terminals
-must be provided. the UT-1401 is environmentally hardened and, if suitably handled, can be mounted virtua
-lly anywhere in plant or factory; in a panel or enclosure wall mounted or Flameproof enclosure or even on
the process machinery. it can withstand ambient temperature up to 50°C
Easy to Configure
1. OVERVIEW
2.1 Mounting
2.2 External Dimension
2. INSTALLATION
CAUTION
The product can be mounted on tilted or horizontal
panel using the mounting clamps supplied. Proper
space must be available at the back of the panel for
installation and maintenance activity.
Installation Mounting Precautions
FAILURE TO COMPLY WITH THESE INSTRUCTION MAY
RESULT IN INSTRUMENT DAMAGE
It has internal keypad to programming the instrument. It has stainless steel face plate, which is
designed for wall mount Clean Room Indication where you need easy mounting mechanism. this
instrument enables you to measure differential pressure (DP) in the following fields.
1) HVAC (Heating, Ventilation, Air Conditioning, Cooling). 2) Pharmacy Industry.
3) Blood Stations, Pharmacies. 4) Horticulture and cultivation of plants.
The UNITECH “Differential Pressure Indicator : UT-1401" is specially designed to indicate the Room pressure
between two different areas. The large 3 digit, 0.8" high LED display is easy to read, even from a distance,
which can help the user to monitor the DP and to take necessary actions to maintain the room conditions as
per the requirement or application.
All dimensions are in mm
To Next Page
Loading...