Unitest Hexagon 110 - English

Table of Contents ......................................................Page
1.0 Introduction / Scope of Supply ............................29
2.0 Transport and Storage ........................................30
3.0 Safety Measures ..................................................31
4.1 Operation Elements/Display/Menu Functions ......33
4.2 Menu Keys ..........................................................34
5.0 Carrying out Measurements ................................34
5.1 Voltage Measurement ..........................................35
5.2 Frequency Measurement......................................36
5.3 Resistance Measurement ....................................37
5.4 Continuity Test ....................................................38
5.5 Diode Test............................................................39
5.6 Capacity Measurement (capacitor test)................40
5.7 Current Measurement ..........................................41
5.8 Temperature Measurement ....................................
(only UNITEST Hexagon 120) ..............................43
6.0 Special Functions ................................................44
6.1 Auto Power Off ....................................................44
6.2 Relative Value ......................................................44
6.3 NMRR/CMRR ......................................................44
7.0 Maintenance ........................................................45
7.1 Cleaning ..............................................................45
7.2 Calibration Interval ..............................................45
7.3 Battery Replacement............................................46
7.4 Fuse Replacement................................................47
8.0 Technical Data......................................................48
References marked on instrument or in instruction man-
ual:
Warning of a potential danger, comply with instruction
manual.
Reference. Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical
shock.
Continuous double or reinforced insulation complies
with category II IEC 61140.
28
Table of Contents
PTDB93525002.qxd:PTDB93525001-03.qxd 17.04.2007 9:22 Uhr