The UNITEST Hexagon Multimeters are universally usable
multimeters. They have been built in compliance with the
most recent prescriptions and guarantee safe and reliable
measurements. The UNITEST Hexagon multimeters are a
valuable support during performance of standard meas-
urement tasks for trade and industry, as well as for the DIY
electrician. The instruments characteristics are as follows:
• Digital Multimeter with high resolution and fast response
time
• 5
3
/4-digit, digital display with 500.000 digits and addi-
tional bargraph display
• True rms measurement
• Voltage measurement at a frequency band width of
100kHz, also for measuring halogen illumination
• Acoustic warning signal for wrong socket assignment
with reference to the measurement range
• Electrically isolated RS 232 interface
• Additional double thermometer
• Safety in compliance with DIN VDE 0411, EN 61010,
IEC 61010, CAT III / 1000 V
The scope of supply comprises of:
1 UNITEST Hexagon 710 or 720
1 Protection holster
2 Test leads (1x red, 1x black)
1 Thermal probe (only Hexagon 720)
1 Battery 9V, IEC 6LR61
1 Instruction manual
Accessories available:
UNITEST Software incl. interface cable, Cat. No. 1246
42
Introduction / Scope of Suppl
To Next Page
Loading...
