4.1 Menu Keys
This key is used to record the maximum, the mini-
mum or the difference between maximum and minimum
measurement value of a measurement series.
(Peak Hold)
The key is used to switch to the CREST function
(Peak-Hold). This function allows the detection of maxi-
mum and minimum values of short signals (>0,8 ms).
The key is used to change to the relative value
function, whereby the display can be set to zero to deter-
mine the relative value with respect to a measurement val-
ue.
The key is used to switch to 500,000 digits display
range within the DC voltage range, and to 999,999 digits
within the Hz range.
/
All measurement ranges marked in yellow at the measure-
ment function selection dial can be selected when pressing
the key. The display light is switched on if the
key is pressed longer than one second.
/
The [Range] key is used to switch between automatic and
manual measurement range selection.
46
Menu Key
To Next Page
Loading...
