Unitron Smart Control remote User Manual

Caring for your Smart Control
Open the battery compartment and remove
the battery if the remote control will not be
used for long periods of time.
Do not use your Smart Control in the bath or
shower or immerse it in water.
If your remote control does become wet, do
not attempt to dry it in an oven or microwave.
Do not adjust any controls. Open the battery
compartment and remove the battery to allow
your remote control to dry naturally for 24
hours.
Protect your remote control from excessive
heat (hair dryer, vehicle glove box or
dashboard).
Do not drop your remote control or knock it
against hard surfaces.
Accessories
Your Smart Control can be used with a
lanyard so that you can carry the remote
around your neck or wrist. Attach the lanyard
to the remote, as illustrated below.
14 15
1.
7.6.
2.
3.
5.
4.

Unitron Smart Control remote Specifications

General

Type	Remote Control
Connectivity	Wireless
Compatibility	Unitron hearing aids
Functionality	Adjust volume, change programs
Wireless Technology	Proprietary wireless

Summary

Your Smart Control at a Glance

Turning Your Smart Control On and Off

Replacing the Battery

Low Battery Warning

Caring for Batteries

Operating Instructions

Selecting Hearing Aid for Adjustment

Using the Left-Both-Right switch to select left, right, or both hearing aids for adjustment.

Adjusting Hearing Aids with Smart Control

Overview of how to personalize hearing aid settings using the remote control.

Scroll Wheel Usage for Comfort and Clarity

Using the scroll wheel to adjust speech clarity and comfort in noisy environments.

Volume Control Buttons

How to increase or decrease the volume of your hearing aids using the +/- buttons.

Telephone (or Program) Button

Switching to the telephone program or other custom listening programs.

Program Change Button

Advancing through available listening programs on your hearing aids.

LearnNow™ Button Function

Teaching your hearing aids preferred settings for different listening environments.

Home Button Function

Returning hearing aids to their default start-up program and settings.

Accessories

Caring for Your Smart Control

Cleaning Your Smart Control

Troubleshooting Guide

Warnings and Precautions

Labeling Information

Declaration of Conformity

Electromagnetic Emissions Guidance

Electromagnetic Immunity Guidance

Recommended Separation Distances

Unitron Distributors