Replacing the battery
The battery compartment is located on the
back of the Smart Control.
1. Slide the battery cover in the direction of
the arrow.
2. Grasp the old battery with your thumb and
index finger and remove.
3. Insert the new battery into the battery
compartment in the correct +/- position,
placing the battery’s minus (-) end into the
compartment first.
4. Slide the battery cover in the opposite
direction of the arrow.
Turning your Smart Control on and off
Your Smart Control has an On-Off (or travel
lock) switch on the left side of the remote.
To turn the remote control on, slide the switch
into the On or unlocked position .
To turn the remote control off, slide the switch
into the Off or locked position . Sliding the
switch to the Off position will avoid sending
unintentional commands to your hearing aids
(while the remote is in your handbag or
pocket, for example).
4 5
To Next Page
Loading...
Need help?
General
