TCS Pro 500
UNITRON
®
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com 4
INTRODUCTION
Congratulations on the purchase of your new UNITRON TCS Pro 500. UNITRON instruments are engineered and
manufactured to the highest quality standards. UNITRON instruments are carefully inspected and tested by our
staff of trained technicians in our New York facility. Careful quality control procedures ensure each TCS Pro 500 is of
the highest quality prior to shipment.
UNPACKING AND COMPONENTS
Your TCS Pro 500 arrived packed in a molded Styrofoam container. Do not discard the container: the Styrofoam
container should be retained for reshipment of your TCS Pro 500 if needed. Avoid placing the TCS Pro 500 in dusty
surroundings or in high temperature or humid areas as mold and mildew will form. Carefully remove the TCS Pro
500 from the Styrofoam container and place it on a flat, vibration-free surface and away from electromagnetic fields.
Your TCS Pro 500 comes with an A/C power cord and with a mini USB adapter.
CARING FOR THE CAMERA LENS
If dust is found on the camera lens, clean using canned air or an air bulb to remove dust or dirt that may have
accumulated on the lens surface.
If more persistent dust or dirt is found, please consult with an authorized UNITRON distributor for assistance. To
locate a UNITRON distributor near you, please call UNITRON at 631-543-2000.
To Next Page
Loading...
Need help?
General