TCS Pro 500
UNITRON
®
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com 6
Battery Maintenance & Charging
When the low battery warning window appears on the screen, you should immediately charge the battery.
How to Charge the Battery
Plug in the A/C power adapter
Charging picture appears on the screen
When the battery is fully charged, this picture will
appear on the screen:
NOTES:
If the TCS Pro 500 is not used for a long period of time, it must be charged at least once per month to avoid
depleting the battery.
It takes longer to charge the battery when operating the TCS Pro 500 at the same time.
When the TCS Pro 500 shuts down for shortage of power, low power reminder will appear after you plug in the
adapter. After charging for a while, the TCS Pro 500 will get enough power to go into the main interface
automatically.
It takes approximately 12-15 hours to charge the TCS Pro 500. The TCS Pro 500 was charged initially before
shipment, however, the battery discharges power when not being used.
Button Operations
Power Button
To Turn the Power On: TOUCH the power button for 5
seconds.
If the TCS Pro 500 is On, but in Sleep Mode: PRESS the
power button once to move into ready mode.
PRESS the power button for 5 seconds to turn the power-
off and TOUCH "OK" to shut down the equipment on the
pop-up screen (shown left).
CAUTION: PRESSING the power button for 8 seconds will
reset the TCS Pro 500 (i.e., date, time). Use this function
with caution.
To Next Page
Loading...
Need help?
General