7170
Your hearing aids and uDirect 2 are given a
unique communication code during the fitting.
This ensures that the device will not affect
hearing aids worn by others.
When using an FM transmitter, be aware that
radio signals might also be picked up and
overheard by other receivers.
Do not disconnect the neckloop while the
uDirect 2 is transmitting signals to your hearing
aids.
For safety reasons, recharge the uDirect 2 only
with chargers supplied by Unitron or with USB-
certified chargers >500 mA.
Do not connect an USB or audio cable exceeding
3 meters (9ft) in length to the uDirect 2.
When the uDirect 2 is not in use, turn it OFF and
store it safely.
Other important information
High-powered electronic equipment, larger
electronic installations and metallic structures
may impair and significantly reduce the
operating range.
If the hearing aids do not respond to the
uDirect 2 because of an unusual field
disturbance, move away from the disturbing
field.
To Next Page
Loading...
Need help?
General
