76
Turning the uDirect 2 ON and OFF
Slide the power switch
(
) as shown to turn
the uDirect 2 ON or OFF.
Switch the uDirect 2
OFF when not in use or if in storage or during
transportation.
For operational use switch the uDirect 2 ON.
Battery status information
The power indicator shows the following:
Green for 2 seconds Switching ON
Blink red then solid
for 2 seconds
Switching OFF
Slow blink green Normal operation
Short blink red <20% battery left,
please charge
No blinking just
after switching ON
Charge for at
least 2 hours
If the neckloop has been unplugged for more
than 2 minutes, the power indicator is only lit as
long as a button is pressed.
OFF ON
To Next Page
Need help?
General
