3534
Managing multiple audio inputs to the
uDirect 2
When an audio source is connected via the
uDirect 2, your hearing aids will automatically
switch to special programs.
Up to 4 automatic programs can be fine-tuned
by your hearing healthcare professional.
It is possible to have multiple audio sources
connected and in operation with the uDirect 2:
• Two Bluetooth devices
(e.g., phone and uTV 2)
• One audio input (3.5 mm audio plug)
• One FM receiver
Spoken status indicators and the audio
indicator light inform you about the connected
inputs.
An audio source is considered as “connected” to
the uDirect 2 if:
• The audio plug is inserted (with or without
audio signal)
Wearing the uDirect 2 in different ways
Standard
To benefit from the streamer and
remote control functions, we
recommend wearing the uDirect 2
around the neck. During calls your
voice can only be picked up if the
uDirect 2 is not covered by clothes.
Handheld remote control
To use the uDirect 2 as a remote
control only, it can be held
and operated in the hand. The
neckloop must be removed in this
case.
Under clothing
If you wear the uDirect 2 under
clothing during phone calls, the
external Unitron microphone “MC1”
is needed (optional acccessory).
To Next Page
Loading...
Need help?
General
