4140
Summary of indicator lights
The indicator lights provide helpful
information as follows:
Power indicator
Charging Solid red
Charged and full battery Solid green
Switching ON Green 2 seconds
Switching OFF Red 2 seconds*
Battery above 20% Blink green **
<20% battery remaining Short blink red**
* When switching the uDirect 2 OFF, the
power indicator may blink red first while
the uDirect 2 is properly disconnecting all
Bluetooth devices.
** If the neckloop is not connected to the
uDirect 2, the battery level is only shown
during startup, charging and when a button is
pressed.
Resetting your uDirect 2
If, for some reason, the uDirect 2 becomes
unresponsive:
1. Slide the uDirect 2 power
switch to the ON position.
2. Press and hold the (
),
(
) and ( ) button
simultaneously for 2 seconds.
3. Slide the uDirect 2 power
switch to the OFF position.
4. Wait for 5 seconds.
The uDirect 2 is now reset and will resume
normal operation when switching ON again.
After resetting the Bluetooth pairings, the
configuration status and the grouping to the
hearing aids are kept.
To Next Page
Loading...
