1514
When using your streamer for the rst time,
charge it for at least three hours even if the
battery indicator turns green earlier. Aer the
initial charge, you may leave the streamer in the
charging slot for and unlimited time.
Charging is complete when the streamer’s
indicator light turns solid green.
The uTV can either be on or o during
charging. Its status indicator light does not
indicate the charging process.
The typical time to fully charge the streamer is
minutes.
We recommend that the streamer is switched
o while charging.
For safety reasons, recharge the battery
only with chargers supplied by Unitron. If
other chargers are used they must be USB
certied (. VDC / mA).
Step : Pairing uTV with your streamer
If you have received the uTV and the Unitron
streamer together in a complete set, they are
paired already and you may move on to Step 7. If
they were purchased separately, they must rst
be paired with each other.
First, put your streamer into pairing mode.
(Check your streamer’s user guide for further
details.)
Next, put the uTV into pairing mode.
To manually start pairing mode on the uTV :
. Switch uTV on.
. Press the pairing button on the back, and
the main indicator light will start rapidly
blinking blue.
. Make sure uTV and the streamer are within
m ( ) range.
uStream uDirect
To Next Page
Loading...
Need help?
General
