Unitron uTV 3 Guide

2726
Troubleshooting guide
Most probable cause Remedy
None of the indicator lights turned solid blue
Devices are turned o Turn on devices
Devices are not paired Repeat pairing
I see a rapidly blinking blue indicator light on the uTV 
uTV  is in Bluetooth
pairing mode
Go to the pairing section of
your streamer’s user guide
Only one of the blue indicator lights turned solid blue
One of the devices is
connected to another
Bluetooth device
Make sure to switch o all
other Bluetooth devices
except the streamer and
uTV 
Both indicator lights are solid blue but I cannot hear
the TV
The streamer is out of
range of the hearing
aids
Wear your streamer
correctly. Turn all devices
o and on again
The streamer is not
correctly programmed
for your hearing aids
Ask your hearing healthcare
professional to regroup
your streamer and hearing
aids
Most probable cause Remedy
I cannot hear the sound from the TV via the streamer
Devices are not on Turn on devices
Cables not plugged in
correctly
Repeat steps 2 and 3
No audio input to uTV ,
the light indicator blinks
green
Make sure TV is not muted
Select a 75% volume level
on the TV
Make sure the audio cable
uses an “out” port
uTV  is in pause mode Indicated by blue blinking
status lights on both
devices. A short press of
the streamer access ( )
button will resume
streaming
Distance between
streamer and uTV 
is too far
Bring devices closer to each
other, 30 m (100 ) is the
maximum in line of sight
To avoid streaming
interruptions, make sure
you wear your streamer
correctly and keep the uTV 
within the operating range
Some TVs may not output
stereo sound when in
surround sound mode
Try switching TV or devices
to stereo output

Unitron uTV 3 Specifications

General

Brand	Unitron
Model	uTV 3
Category	Hearing Aid
Language	English