76
Step : Connecting to the TV
Supported audio formats:
The uTV can be connected to any audio source
such as a TV, PC or hi- system. It supports
three dierent audio input formats.
For best results, we recommend you use the
optical or coaxial connection if available on your
audio device.
Note: please ensure to always connect uTV to
the audio output of your device.
Signal priorities:
Normally it is enough to connect one audio
cable. If more than one cable is connected and
a signal is present, uTV will select the best
possible input in the following order: optical,
coaxial, analog.
Note: even though the optical and coaxial
cables are only one wire, the signal is stereo.
uTV shows the selected input by an orange
audio indicator light:
Input selected Slow blink orange
Input selected and
audio available
Solid orange
To Next Page
Loading...
