Unitron uTV 3 - Page 8

1110
Option 3: connecting via RCA/Cinch cable
If an RCA output (red / white) is available:
• Unpack the cable labeled “Analog RCA/
Cinch”
• Connect the . mm plug into the “Analog”
input of the uTV . Connect the red and
white plugs to the matching red and white
output sockets on your TV
Option 4: connecting to the headset socket
• Unpack the cable labeled “Analog . mm”.
• Connect the stereo plug into the “Analog”
input of the uTV . Plug the other end into
the headset output socket of your TV