UNITY LAUNDRY SYSTEMS UTS62 - GENERAL SPECIFICATIONS UTS62

10
Part. 14000101 Rev. 12/2019
®/™ ©2019 Unity Laundry Systems. All rights reserved.
03 INSTALLATION
3.2 FOUNDATION REQUIREMENTS
Themachinemustbeplacedonasolidoorwhichislevelinbothdirections,andofasufcientstrengthtobeabletosupport
the weight of the machine, of any existing machinery and the means of transport.
NOTE: Do not mount on tile oors, elevated oor levels, stacked multiple base frames, or over basements or crawl
spaces because of the high extract speed and the G-forces exerted.
WARNING
To reduce the risk of re, serious injury, property damage and/or
death, install the machine on a level, uncovered concrete oor of
sufcient strength at grade.
3.3. WATER CONNECTION
To connect water service to a machine with hoses, use the following procedure:
1. Beforeinstallinghoses,ushthebuilding’swatersystematthemachineconnectionvalvesforatleasttwo[2]minutes.
2. Checkltersinthemachine’sinletadapterhosesforpropertandcleanlinessbeforeconnecting.
3. Hanghosesinalargeloop;donotallowthemtokink.